water heater thermal expansion tank

Expansion Vessels - Why?In practice water cannot be compressed and therefore any increase in water volume must be accommodated in an expansion vessel designed and sized for that purpose. Naturally, as water heats up, it expands. This expanded water has to go somewhere. In an open type system the open expansion tank situated at t

Featured Products

Expansion Vessels - Why?

In practice water cannot be compressed and therefore any increase in water volume must be accommodated in an expansion vessel designed and sized for that purpose. Naturally, as water heats up, it expands. This expanded water has to go somewhere. In an open type system the open expansion tank situated at the highest point of the system would accommodate this extra volume. A closed type system does not have an open fixture such as described above. Hence, a correctly sized Dezhi/Aqua Leader expansion vessel is necessary. When properly sized, the Dezhi/Aqua Leader Expansion Vessel will accommodate the expansion of the fluid during the heating or cooling cycle without allowing the system to exceed the pressure limits of any of the components in the system.
Thermal Expansion Tank for Water Heater
Configuration and Features

Dezhi/Aqua Leader  Expansion Vessels incorporate a diaphragm/bladder arrangement which provides a flexible barrier between the system fluid and the precharged air in the vessel. As the system water expands, the bladder also expands pushing against the precharged air cushion. This is how the expansion is accommodated in a closed-loop system.

Standard construction is carbon cold pressed steel with natural rubber or EPDM membranes.

Temperature limits are 10oC to 99oC.

Working pressures vary from 3 Bar to 35 Bar depending upon which vessel is selected. Higher pressure ratings of 45 and 50 Bar are available if required.

Other Features

• Replaceable bladder

• Threaded connections - stainless.

• Pre-set pressure 400KPa - variable.

• Wall mount bracket available for 8-36 litres.

• Also available in stainless steel.

• Relief valve supplied loose to suit system pressure - please specify.

Sizing for Expansion Vessels

In order to select a suitably sized expansion vessel, the following information is required:

• Total system water volume in litres.

• Temperature of water when system is filled (in oC) and average maximum operating temperature (in oC).

• Minimum operating pressure in kPa and maximum operating pressure (10% below relief valve, in kPa).

• Which level of the building it will be installed and number of levels there are above it?

Suggested Specification

Expansion Vessels shall be the closed type similar to Dezhi/Aqua Leader  (available from Taizhou Tianyang Electrical Co., Ltd ) or approved equal and suitably sized to suit the system temperature and pressures likely to be encountered. Vessels construction to be fully welded and sealed steel construction, complete with integral EPDM rubber liner to maintain the water within the system without exposure to air or contamination. Each Vessel to be supplied with a suitably safety relief valve vessel must have a replaceable bladder.

Taizhou Tianyang Electrical Co., Ltd reserves the right to make changes without notification.


Introduction

Dezhi expansion vessels are suitable for use in central heating and cooling installations.

Nitrogen, a dry inert gas used in the Dezhi/Aqua Leader range of expansion vessels, improves the vessel's life span by reducing corrosion inside the vessel, and prevents loss of pre-charge pressure. Nitrogen permeates through rubber slower that oxygen and is far less reactive to both steel and aluminium creating fewer debris inside the vessel. Nitrogen does not degrade rubber prolonging the membrane life.

Oxygen in compressed air permeates through the membrane, thus reducing the pre-charge pressure over time. During normal operation, oxygen oxides the membrance in the vessel, causing under inflation pressure and will not corrode the inside of the vessel.

It's recognised in the industry that oxidative ageing is one of the primary causes of decreased vessel life. Tests have shown that if vessels are inflated with Nitrogen, there is a significant reduction in failure and increased vessel life.

For use under high pressure. Top-quality high strength steel, with a gleaming red (RAL 3002) epoxy powder coating - perfect protection and finish. Clamp ring of heavy-duty thermally-galvanised steel. Our flexible EPDM Bladder with rolling action are suitable for use with glycol based anti-freeze addition up to 50%. Exact details are available on request. The nitrogen airvalve is sunk and cannot be damaged due to the cap and extra protective plastic beige coverplate. Uncoated threaded system connection, ensuring problem free connecting.

Specifications

  • Max. working pressure: 10 bar(g)
  • Max. temperature at (heating) outlet: 99 °C.
  • Max. temperature diaphragm: 99 °C (DIN4807/3).
  • Max. supply temperature (boiler): 90 °C.
  • Min. working temperature: -10 °C
  • In accordance with Pressure Equipment Directive 97/23/EG.

The main elements of the membrane tank are a metal case of high-quality deep-drawn steel and an elastic membrane made of Butyl Rubber Membrane separating the tank into two chambers - an air (cavity between the metal case and a membrane) and a water one (the internal cavity of the membrane). The air chamber is constantly under a pre-set air pressure. The service life of diaphragm tanks is at least 10 years of continuous operation. The durability of the membrane - at least 100,000 cycles. Dupont (France) materials are used as paint. 

Features of the design - the location of the top flange (TOP tanks) provide ease of installation / disassembly of the equipment, virtually eliminates the possibility of air plugs in the water cavity of the membrane, the minimum time required to replace the membrane; small overall dimensions.

Company profile

Taizhou Tianyang Electrical co.,LTD. Is located in Shangma industrial Zone,Shitang Town,WenlingCity,Zhejiang rovince,covering an area of 15,000 square meters.Our Company has over 30 years experience in mold design and exploition. "DEZHI"and "AQUALEADER" are our proprietary brand of our company.We have produced pressure tank for more than 20 years.Available volumes range from 0.15 to 1500 liters.and working pressure from 4 bar to 25bar. Our products are applied to pump systems .Our products are exported to numerous overseas clients.We can custom design and manufacture products according to client-supplied requirements.
We adhere to the business philosphy"Credibility,Quality and service",our scientific management is based on the domestic market, but facing to the world.Warmly welcome customers both domestic and from abroad.We sincerely hope to cooperate and develop together to create a better future.
Taizhou Tianyang Electrical Co.,Ltd. Is always your most loyal partner.


Thermal Expansion Tank for Water Heater


I would like to take this opportunity to introduce our company to you. I am contacting you on behalf of Taizhou Tianyang Electrical Co., LTD. We are the factory from China for making Pressure Tanks for Fire Protection,Residential Water and Irrigation, Sport Turf and Landscape Irrigation, Agriculture and Horticulture Irrigation, Water Filtration, Treatment & Recycle, Solar and Stock Water System, Rain Water Harvesting, Pump Systems. Based on ISO quality management system, we have obtained CE, KC, ISO 9001, ISO14001, OHSAS 18001, SGS, Water Mark, and Wras Certificates for our company & our Pressure Tanks. Welcome to visit Taizhou Tianyang  Electrical Co.,LTD when it is more convenient for you.


Thermal Expansion Tank for Water Heater


Single Diaphragm Pressure Vessel


A range of reliable vessels, available in 10 and 16 bar pressure ratings and sizes from 3  to 200 litres. The series is constructed of a virgin polypropylene liner combined with an Certificated high grade butyl diaphragm, which is held against the wall of the tank with a steel clench ring. The tanks design includes rounded internal parts to prevent piercing and a unique connection providing a dual water/air seal for a complete leak and maintenance free vessel.


Solar Aqualeader tanks are quality tested at several stages on the production line to insure the structural integrity of every tank. Solar Aqualeader  tanks represent the best value for the investment and are the best quality pressure vessels available today.

Single Diaphragm Pressure Vessel Structure

Thermal Expansion Tank for Water Heater
Thermal Expansion Tank for Water Heater
Thermal Expansion Tank for Water Heater
Thermal Expansion Tank for Water Heater

Thermal Expansion Tank for Water Heater
Thermal Expansion Tank for Water Heater
 

Specifications:

  • Single diaphragm design 100% potable quality butyl,we also have EPDM Membrane For Potable  Purpose.              
  • Patented 316/304 stainless steel connection.                                                             
  • Virgin polypropylene liner, so no water touches plain steel.                              
  • Internal clench ring becomes more secure at higher pressures.                        
  • High quality two part polyurethane, epoxy primed paint finish - Almond.           
  • Brass stemmed air valve and O-ring sealed valve cap,we have our own patent pressure valve.No need any maintaince during life time.
  • CE, WRAS,KC,Water Mark/UPC/SGS approvals.                                                      
  • Maximum temperature up to 99 °C.                                                                        
  • Standard maximum pressure 150 PSI / 10 Bar.For Super Aqualeader ,we have appied 240 psi/16 bar
  • 5 To 7 Years Warranty  According To Clients Requirements

Materials:

  • Diaphragm: high grade butyl
  • Liner: polypropylene
  • Clench ring: steel
  • Air valve: brass
  • Valve cap: threaded o-ring
  • Water connection: stainless steel SUS 304/SUS316
  • Exterior: steel
  • Pump stand: Engineering plastic

Market Sectors: (Applied with different membrane---Butyl/Epdm)

  • Domestic
  • Commercial
  • Agricultural
  • Industrial
  • Irrigation
  • Mining

Applications:

  • Water booster systems
  • Thermal expansion
  • Irrigation systems
  • Hydraulic hammer arresting
Technical Parameter 
 
ModelTank VolumeMaxi Working PressureDiameterHeightConnectorPackage
xLiterBarmmmmInchcm
TY-12-2G810/16220340122x22x34
TY-12-2G-W810/16220320122x22x32
TY-12-3G1210/16260360126x26x37
TY-12-4.5G1910/16290400131x31x40
TY-12-4.5G-W1910/16290380131x31x38
TY-12-6.3G2410/16295460131x31x46
TY-12-9.3G3610/16360470136x36x47
TY-12-11G6010/16420540142x42x54
TY-12-15G8010/16460580146x46x58
TY-12-22G10010/16460700146x46x70

FAQ Details: 

   1.Q: What is your MOQ of this item?    
      A: We are a factory, have stock. 1PCS is ok!

   2.Q: What is the delivery time?     
      A: 7-25 days after receiving orginal L/C or deposit by TT.

   3.Q: Is it all right to make customer's own brand name?
      A: Yes we supply OEM service. Please send us a authorization doc.

   4.Q: Where is your Loading Port?
      A: Ningbo, Zhejiang, China.

   5.Q: What are your payment terms?For Bulk Quantity Purchase
      A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
      For Samll amount Trial Order ,Please arrange the full payment 

   6.Q: What is your company's available production capacity?
      A:  50000~60000 pieces of  Pressure Tank per month.

Welcome To Visit Us 

Thermal Expansion Tank for Water Heater

Please do not hesitate to contact me if you have any questions.
 
Yours Sincerely
 
Tom Lee

-----------------------------------------------------------
Tom Lee 
Business Development Manager
Taizhou Tianyang  Electrical Co.,LTD
Ph: +86-21-57813120
Cell:+86-18917007187
Fax:+86-576-86818392
aqualeader.en.made-in-china.com 
Thermal Expansion Tank for Water Heater
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours