SZS series automatic gas (oil) fired steam/hot water boiler adopts vertical double-drum D-shape structure, Longitudinal drum,full membrance wall structrue, slightly positive pressure combustion. Furance is wrapped by membrane wall. With economizer adn other auxiliary heating surfaces located at the rear boiler. The burner is located at the front wall of boiler, in which the convection tube bundle and furance are arranged in parallel. The flue gas goes in turn through the furnace rear to superheater( if any) , convection tube bundle, and the rear heating surface before venting into the air through the stack.
Techincal Characteristics
1. It adopts full membrane water-cooling wall structure is all around the boiler proper and furnance, so the furnace has reliable seal and good tightness, which can improve the anti-blasting capacity of boiler adn avoid flie gas leakage. Keeping the boiler runs safety and stably.
2. The convection surface consists of water tube, the heat emission effect. And improve the heat efficiency.
3. The water circulation of steam boiler adopts natural circulation loop which brings little flow resistance with no bad working conditions like stagnancy, backflow or free level surface, and effectively avoid tube explosion.Hot-water boiler adopts forced circulation loop to ensure water circulation safety.
4. Compact structure, Less installation, Less investment.
5. Easily clean and mend the front and back smoke rooms with the doors.
6.With well-known, highly efficient burner auxiliary equipment and accessories, fully automatic operation.
7. Prefect control system to ensure the safe operation of the boiler.
8.The boiler composes boiler body, burner interface, pipeline, valve and meters, platform and stairs, instrumentation and safety devices, suited accessories (water make-up pump, burner) and electric control cabinet.
9. This series boiler has advantages of high efficiency, energy-saving, safety, stable, operation easy, self-contained and low pollution. It is widespread availability in the mineral companies, hotels, hospital schools.
Wide Fuel Adaptability
The fuel of the boiler can be used diesel oil, heavy oil, nature gas, coal gas,coke oven gas, blast furance gas, converter flue gas, etc.
Control
It adopts fully automatic control. The start-stop, lighting and combustion adjustment are all automatically. The high-low water level alarm , the limit low water level, steam over pressure, fire observation and so on are protected in chain.
1.Boiler body, insulating layer
2. Parts of pipeline, meters and valves
3. Platform and ladder
4. Electric control cabinet
5. Suited accessories
6. The chimney
7. Technical documents
a. Drawing of boiler.
b. Calculation of stressed parts (including safety valves calculation sheets).
c. Installation and operation instructions. (Accessories refer to random documents.)
d. Quality certificate of the boiler.
Boiler Code and Standards
ASME Boiler and Pressure Vessel Code
China Boiler & pressure Code
Others code and standards (Relevant countries)
Scope of product
Steam Boiler
Steam flow: 3000.00-100,000.00 kg/hr Pressure: 1.0-5.4 MPa
Hot Water Boiler
Thermal Power: 2.8-90 MW
Product Parameters
Techincal Characteristics
1. It adopts full membrane water-cooling wall structure is all around the boiler proper and furnance, so the furnace has reliable seal and good tightness, which can improve the anti-blasting capacity of boiler adn avoid flie gas leakage. Keeping the boiler runs safety and stably.
2. The convection surface consists of water tube, the heat emission effect. And improve the heat efficiency.
3. The water circulation of steam boiler adopts natural circulation loop which brings little flow resistance with no bad working conditions like stagnancy, backflow or free level surface, and effectively avoid tube explosion.Hot-water boiler adopts forced circulation loop to ensure water circulation safety.
4. Compact structure, Less installation, Less investment.
5. Easily clean and mend the front and back smoke rooms with the doors.
6.With well-known, highly efficient burner auxiliary equipment and accessories, fully automatic operation.
7. Prefect control system to ensure the safe operation of the boiler.
8.The boiler composes boiler body, burner interface, pipeline, valve and meters, platform and stairs, instrumentation and safety devices, suited accessories (water make-up pump, burner) and electric control cabinet.
9. This series boiler has advantages of high efficiency, energy-saving, safety, stable, operation easy, self-contained and low pollution. It is widespread availability in the mineral companies, hotels, hospital schools.
Wide Fuel Adaptability
The fuel of the boiler can be used diesel oil, heavy oil, nature gas, coal gas,coke oven gas, blast furance gas, converter flue gas, etc.
Control
It adopts fully automatic control. The start-stop, lighting and combustion adjustment are all automatically. The high-low water level alarm , the limit low water level, steam over pressure, fire observation and so on are protected in chain.
Supply Scope
Massive parts of self-contained boiler include:1.Boiler body, insulating layer
2. Parts of pipeline, meters and valves
3. Platform and ladder
4. Electric control cabinet
5. Suited accessories
6. The chimney
7. Technical documents
a. Drawing of boiler.
b. Calculation of stressed parts (including safety valves calculation sheets).
c. Installation and operation instructions. (Accessories refer to random documents.)
d. Quality certificate of the boiler.
Boiler Code and Standards
ASME Boiler and Pressure Vessel Code
China Boiler & pressure Code
Others code and standards (Relevant countries)
Scope of product
Steam Boiler
Steam flow: 3000.00-100,000.00 kg/hr Pressure: 1.0-5.4 MPa
Hot Water Boiler
Thermal Power: 2.8-90 MW
Product Parameters